Avaya Definity SI - Status Audits; Status Bri-Port

status audits
Issue 4 May 2002
A-95 555-233-123
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
status audits
Help Messages
If the technician presses HELP after entering “status audits,” the following
message appears:
cumulative peak-hour
Error Messages
If the “print” option is specified and there is no printer attached to the terminal or if
the printer is off line, then the following message appears:
Printer failed
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
status bri-port
Help Messages
If the system technician presses HELP after entering “status bri,” the following
appears:
Enter an isdn-bri port location, [’print’]