release board
Issue 4 May 2002
A-61 555-233-123
If the EPN on which the access endpoint resides is not accessible, the following
message appears:
EPN is not available
If the extension is not administered, the following message appears:
Extension not assigned
If the object associated with the specified extension is not an access endpoint, the
following message appears:
Extension assigned to object other than access-endpoint
If the board that contains the access endpoint is not inserted in the system, the
following message appears:
Board not inserted
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
release board
Help Messages
If the system technician presses HELP after entering “release board,” the following
message appears:
Enter 5 character board number
Error Messages
If the format of the board location is incorrect, the following error message
appears:
Port/Board invalid
To Next Page
Loading...
