set time
Issue 4 May 2002
8-295555-233-123
set time
This command allows system technicians to change the day of the week, the day
of the month, the month, year, hour, and minute. The second field resets to zero
(0) whenever the time on the clock is altered, but cannot be modified by the
technician. The day of the week, entered as a text string, translates to an integer
for internal storage.
The system clock time remains the same if no changes are entered on the form.
Output
The following example is a display of set time.
NOTE:
When the system clock is upgraded from an earlier release, the daylight
savings time rule on the set time screen defaults to 0 (no rule). While you
can change the daylight savings time rule, the system clock is not adjusted
automatically until the next transition of the rule.
Action/
Object Qualifier
Qualifier
Description Logins Defaults
Feature
Interactions
set time init
inads
craft
cust
rcust
bcms
browse
The system assigns
a time, if the system
clock is not set
The date and time are
available to software from a
system primitive.
set time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: Sunday Month: October
Day of the Month: 24 Year: 1999
TIME
Hour: 8 Minute: 16 Second: 31 Type: Standard
Daylight Savings Time Rule: 0
WARNING: Changing the date or time will impact BCMS, CDR and MEASUREMENTS
To Next Page
Loading...
