release spe-standby
Issue 4 May 2002
A-71 555-233-123
release spe-standby
Help Messages
If the system technician presses HELP after entering “release spe-standby” the
following message appears:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
release station
Help Messages
If the system technician presses HELP after entering “release station,” the
following message appears:
Enter extension for an assigned station
Error Messages
If the format of the extension is incorrect, the following error message appears:
Extension invalid
If the specified extension is not administered, then the following message
appears:
Extension not assigned
If the specified extension does not belong to a station or attendant console, the
following message appears:
Extension exists but assigned to a different object
If the station port resides on an EPN that is unavailable, the following message
appears:
EPN is not available
If the station port resides on a board that is not inserted in the system, the
following message appears:
Board not assigned
To Next Page
Loading...
