Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-482 Issue 4 May 2002
Output
The following output example is for the test sp-link command. The responses
display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
Not applicable. Always blank.
Maintenance
Name
The name of maintenance object.
Alt. Name
Alternate means of identifying the maintenance object. This field
contains the extension when the object is a data module.
Test No
Test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of codes by test number for each MO.
test sp-link SPE A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
SYS-PRNT 215 PASS
SYS-PRNT 213 PASS
Command Successfully Completed
To Next Page
Loading...
