display cabinet
Issue 4 May 2002
8-59555-233-123
Field descriptions
When you enter the command: display cabinet 3 and the cabinet is a stack of
single-carrier-cabinets, the system displays a screen similar to the figure below.
The fields on the screen are the same as described above.
Cabinet
Administered cabinet number
Cabinet
Layout
Type of cabinet (five-carrier or single-carrier-stack)
Cabinet Type
Type of port network (processor or expansion)
Number of Port
networks
Number of port networks (1 or 2)
Room
Room where cabinet is located, administered on the cabinet form.
Floor
Floor where cabinet is located, administered on the cabinet form.
Building
Building where cabinet is located, administered on the cabinet form.
Carrier
Letter identifying the carrier (A-E or X not applicable)
Carrier Type
Port, processor, switch-node, fan, or not-used
Number
Administered port network number or switch node number
display cabinet 3
CABINET
CABINET Description
Cabinet: 3
Cabinet Layout: single-carrier-stack
Cabinet Type: expansion-portnetwork
Number of Portnetworks: 1
Room: 30n46
Floor: first
Building: main
CARRIER Description
Carrier Carrier Type Number
D not-used PN 03
D not-used PN 03
B port PN 03
A expansion-control PN 03
To Next Page
Loading...
