ISHIDA CCW-R-2 B Series - Page 198

6 FUNCTIONS OF THE OPERATION SCREENS CCW-R-2**B INSTRUCTION MANUAL
6-86
[Mean Count]
* Displayed during count set
weighing only.
The mean count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the mean count for the channel during channel total display.
Displays the mean count for the section during section total display.
[S.D. Count]
* Displayed during count set
weighing only.
The standard deviation count of proper dumps that occur between the start time and
stop time.
Unit: pcs
Displays the standard deviation count for the channel during channel total display.
Displays the standard deviation count for the section during section total display.
[MAX Count]
* Displayed during count set
weighing only.
The maximum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the maximum count for the channel during channel total display.
Displays the maximum count for the section during section total display.
[MIN Count]
* Displayed during count set
weighing only.
The minimum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the minimum count for the channel during channel total display.
Displays the minimum count for the section during section total display.
[Count Range]
* Displayed during count set
weighing only.
The difference between the maximum count and minimum count of proper dumps that
occur between the start time and stop time.
Unit: pcs
Displays the count range for the channel during channel total display.
Displays the count range for the section during section total display.
[Mean Piece Weight]
* Displayed during count set
weighing only.
The mean piece weight of proper dumps that occur between the start time and stop
time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The mean piece weight is displayed during single weighing or section total display.
This is not displayed while section switching is available during channel total display.
[S.D. Piece Weight]
* Displayed during count set
weighing only.
The standard deviation piece weight of proper dumps that occur between the start time
and stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The standard deviation piece weight is displayed during single weighing or section
total display.
This is not displayed while section switching is available during channel total display.
[MAX Piece Weight]
* Displayed during count set
weighing only.
The maximum piece weight of proper dumps that occur between the start time and
stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The maximum piece weight is displayed during single weighing or section total
display.
This is not displayed while section switching is available during channel total display.
[MIN Piece Weight]
* Displayed during count set
weighing only.
The minimum piece weight of proper dumps that occur between the start time and stop
time.
Unit:
g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The minimum piece weight is displayed during single weighing or section total
display.
This is not displayed while section switching is available during channel total display.
Table 6-39 Total Data Items (Continued)
Item Name Description