CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-113
• Timing values changed during production are reflected in the preset.
• Timing values changed during drain are not reflected in the preset.
• Set these parameters with careful attention as they are important parameters.
8 WH ON Sets the operation time of WH (weigh hopper).
9 BH ON Sets the operation time of BH (booster hopper).
10 PH ON Sets the operation time of PH (pool hopper).
Table 6-53 Timing Adjustment Items(Continued)
No. Item Name Function
To Next Page
Loading...
Need help?
General
