4535 611 989314730-0047-01iE33 Service Manual Page 191
CSIP Level 1 Installation: Installation Procedures
Figure 5-52 Securing the Upper OEM Strapping and
Cable Cover
Panhead screws (2 plcs)
6
7
8
6. Peel the Velcro end of each strap
loose, pull each strap through the
ring and reset the Velcro strap to
secure the printer.
7. Install the OEM cable cover.
8. Secure it to the cart frame using two
panhead screws.
Return to Installation Procedure List.
To Next Page
Loading...