4535 611 98931 iE33 Service Manual Page 134
CSIP Level 1 Installation: Installation Completion
4. Ensure the user information updates and operating notes are with the user information set.
Have the user information available for review by the system operator so that questions can
be answered during the system presentation. Instruct the user how to access information
using the online Help feature.
5. Complete a Quality Assurance Audit (PM) sticker and attach it to rear of the system.
6. Tell the facilities representative that the system is installed and ready for any safety tests that
they normally conduct.
7. Run the System Confidence Test to verify system performance.
System
Presentation
When the system and the customer information are ready, present them to the operators using
the following in-service procedure.
1. Review the customer order with the customer to familiarize them with the system and its
options and to assure them that they have received what they ordered.
2. Present the user information, including the user Help, and operating notes. Describe these
publications and emphasize that all information needed to operate the system and peripher-
als is in them. As questions come up, guide the operators through these publications.
3. Show the operators how to turn on the system and any external peripherals. Explain the dif-
ferences between the main circuit breaker and the On/Standby switch.
4. Describe the initialization process and explain that the system programs itself during this
process.
5. Explain why it is important for them to never remove covers from the system because of
ESD and warranty considerations.
6. Explain the importance of using the correct DVD media. Refer to Table 13-1.
7. Explain how to format a DVD/CD.
To Next Page
Loading...