4535 611 989314730-0047-01iE33 Service Manual Page 303
CSIP Level 1 Disassembly: Disassembly Procedures
Figure 10-43 Transducer Holders
Transducer-holder
6
6. Grasp the transducer holder firmly
and slide it upward until it releases
from the mounting slots. There are
no removable screws on this part.
The two screws on the back side of
the transducer holder slide into the
transducer-holder mounting slots.
Do not remove these two screws.
Return to.Disassembly Procedure List
(1 of 2)
To Next Page
Loading...