4535 611 989314730-0047-01iE33 Service Manual Page 279
CSIP Level 1 Disassembly: Disassembly Procedures
Figure 10-19 Disk Bay Insert Enclosure
Panhead screws (2 plcs)
Tabs (3 plcs)
36
37
36. Remove the two panhead screws
securing the disk bay insert enclo-
sure.
37. Slide the enclosure toward the front
of the system, until the tabs are clear
of the column enclosures, and then
lift and remove the enclosure.
Return to .Disassembly Procedure List
(1 of 2)
To Next Page
Loading...