4535 611 98931 iE33 Service Manual Page 248
CSIP Level 1 Troubleshooting: System Software Tools
Also, wait at least two seconds after using the On/Standby switch to turn the system off before
turning it on again. Not doing so may result in the SIP failing to initialize on bootup.
System
Software
Tools
The system contains a number of software tools used to run tests, record and monitor system
behavior, and conduct analysis. Tool use is documented in several places including: the operation
manual, operations manual help, and in Tech Admin Help. This section provides an overview of
all of the tools and more comprehensive information regarding specific tools that is not covered
in the other documentation.
Manage Setups
The Manage Setups function allows setups data to be copied from the ultrasound system to a
removable disk (DVD). The setups data may then be copied to another ultrasound system or
reloaded onto the current ultrasound system after an upgrade procedure. The Manage Setups
capabilities are available to all users. Refer to the operations manual (on the User Information
CD) for general information and refer to Section 16, “System Administration” for use of Manage
Setups when servicing equipment.
Lic Options
Licensed options enable the use of purchasable options available on the ultrasound system. The
options may be customer-purchased or temporarily enabled for customer use. Up to five
licensed options may be temporarily enabled at one time for each ultrasound system through the
use of license keys. Temporary licensed options are automatically disabled after one month. The
Tech Admin licensed option is automatically disabled after 48 hours. When purchased, the
options are listed as “enabled” in the Licensed Option list.
The Lic Options function displays the licensed options and whether they are permanently
enabled or on a trial-basis. Refer to the ops manual for general information and refer to
Section 16, “System Administration” for use of Lic Options when servicing equipment.
To Next Page
Loading...