4535 611 98931 iE33 Service Manual Page 208
CSIP Level 1 Adjustments: Video Monitor Adjustments
Video Monitor
Adjustments
There are no adjustments on the video monitor. However, the monitor brightness default setting
can be adjusted in the setups (Figure 7-4).
The Monitor control on the 2D touch screen allows you to adjust monitor brightness to com-
pensate for changes in ambient light. Use this control to temporarily change monitor brightness.
When you cycle power, the system resets monitor brightness to the default value.
➤ To set video monitor brightness (power-up default value)
1. Press Setups.
2. Click System Settings.
3. Click the Display tab.
4. Select a setting for Monitor Brightness from 1 (darkest) to 5 (lightest).
5. Click Done.
➤ To adjust the monitor for ambient lighting
1. Touch Next on the 2D touch screen.
2. Turn Monitor to select a setting from 1 (darkest) to 5 (lightest).
To Next Page
Loading...