Philips iE33 - Figure 10-72 HV Switcher

4535 611 989314730-0047-01iE33 Service Manual Page 332
CSIP Level 1 Disassembly: Disassembly Procedures
Figure 10-72 HV Switcher
Front of system
Panhead screws (2 plcs)
Baffle retaining slot
Bracket tab
5
6
6
5. To remove the HV Switcher, remove
the two screws securing it to the
cart frame, disconnect the two cable
connections and slide it out of the
retaining slots. The HV Switcher is
now completely disconnected.
6. To reinstall the HV Switcher, slide
the tab on the HV Switcher bracket
into the retaining slot on top of the
air baffle and secure the HV Switcher
in place using the two panhead
screws.
Return to .Disassembly Procedure List
(2 of 2)