4535 611 989314730-0047-01iE33 Service Manual Page 329
CSIP Level 1 Disassembly: Disassembly Procedures
Figure 10-69 AC Tray
4
5
6
4. Slide the AC Tray out toward you
until it stops.
5. Disconnect the red/black, yellow/
black, OEM power, and main power
cables.
6. Remove the tray from the system by
sliding it the rest of the way out of
the support shelf. The AC tray is
now completely disconnected.
Perform this procedure in reverse for
reassembly.
See Figure 11-7 for the terminal block
and relay wire connection diagram.
Return to .Disassembly Procedure List
(2 of 2)
To Next Page
Loading...