4535 611 98931 iE33 Service Manual Page 129
CSIP Level 1 Installation: Connectivity Information
5. Select the Worklist Server and Performed Procedure Step (PPS) Server from the
pull-down menus.
6. Select the appropriate Define Query options (as defined by the customer).
Verifying
Devices
➤ To verify network devices
1. Press Setups (on the keyboard).
2. Click Print/Network.
3. Click the Global Config tab.
4. Click Devices.
5. In the Device Configuration window, highlight the device that you want to verify.
6. Click Verify. Verification confirms multi-frame and single-frame storage. A message is dis-
played with the verification status.
7. Click OK.
DVD
Configurations
➤ To select what type of information is exported to DVD
1. Press Setups on the keyboard.
2. Click Print/Network.
3. Click the Device Selection tab.
4. Click the DVD tab.
5. Select any of the following:
- Export Native Data
- Export Structured Report
- Export 3D Volume Data
- Export 3D Sub-page Data
To Next Page
Loading...