Xerox WorkCentre 6505 Service Manual

3-48 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Error Messages and Codes
Memory Over flow
Applicable Error Code
• 016-718
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Optional Memory Card (SFP
PL8.1.15; MFP PL8.1.4)
■ None
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Check for memory expansion.
Is additional memory installed?
Is the additional memory installed
properly?
Go to step 2. Install
additional
memory. Or, re-
install it
properly.
2 In the printer driver, set the Print Mode
to “Standard”.
Does the error persist during printing?
Go to step 3. Complete.
3 In the Control Panel, go to Admin
Menu > Maintenance (Mode) and
delete data by executing Clear
Storage.
Does the error persist during printing?
The current
printing job
process
cannot be
continued
because the
memory
capacity is
exceeded.
Complete.
http://www.manuals4you.com

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi