Xerox WorkCentre 6505 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 6-9
Adjustments and Calibrations
Life Counter Values
The life counter tracks the usage of several printer components. All but one of the
“Life” selections in the Parameter list read and display stored counter values for
those components. The one exception is the Life DTB Waste selection, which
allows you to either read or initialize the value. Use the Initialize selection to reset
the life counter for the Transfer Unit should it require replacement.
This table lists each counter and a value considered to be near end of life.
The life counter values reported when checking these parameters are not
expressed in units that can be compared to end-of-life values listed in the
product specifications. Use CWIS to find the life remaining for engine
components.
s6500-169
Shifts the print area in
this direction by reducing
the value.
Shifts the print area in
this direction by reducing
the value.
Shifts the print area in
this direction by
increasing the value.
Shifts the print area in
this direction by
increasing the value.
Slow Scan K to P
Slow Scan 600 M,Y,C
Fast Scan K to M,Y,C
Fast Scan 2 K to M,Y,C
Fast Scan M-Feed, Tray
Image Side
Default Value
Default
Value

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi