Xerox WorkCentre 6505 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 1-25
General Information
First Copy Output Time
First Copy Output Time (FCOT) is the time required for the printer to deliver the
first sheet of paper after the user presses Start. The following conditions are
applied:
• The Controller does not keep the print engine waiting
• The printer is at Ready mode
• Paper is A size Short Edge Feed (SEF)
• The original is on the document glass or in the ADF
• Process control time is not included
Physical Dimensions and Clearances
SFP Dimensions
MFP Dimensions
Mode FCOT (sec.)
Color 30.0 sec. or less
Mono 21.0 sec. or less
Characteristic Measurement
Height 416 mm (16.4 in.)
Height with 250-Sheet Feeder 524 mm (25.9 in.)
Width 403 mm (15.9 in.)
Depth 469 mm (18.5 in.)
Weight (base printer with consumables) 18.6 kg (41.0 lb.)
Characteristic Measurement
Height 584 mm (23”)
Height with 250-Sheet Feeder 690 mm (27.1 in.)
Width 430 mm (16.9 in.)
Depth 544 mm (21.4 in.)
Weight (base printer with consumables) 28.8 kg (63.5 lb.)

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi