Xerox WorkCentre 6505 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 5-5
Print-Quality Troubleshooting
Toner smears or print comes off page.
a. If you are printing on an uneven print
surface, change the Media Type settings in
the Tray Settings menu.
b. Verify that the paper is within the printer
specifications.
Toner spots appear on the page and printing is
blurred.
a. Check the Toner Cartridge(s) to make sure
that it is installed correctly.
b. Change the Toner Cartridge(s).
Entire page is white or one color is missing from
image.
a. Ensure the packaging material is removed
from the Toner Cartridge.
b. Check the Toner Cartridge to make sure that
it is installed correctly.
c. The toner may be low. Change the Toner
Cartridge.
Streaks appear on the page.
a. The toner may be low. Change the Toner
Cartridge(s).
b. If you are using preprinted forms, make sure
the toner can withstand the temperature of
0° C to 35° C.
Smudges or Smears
Random Spots
Blank Print
Horizontal Band, Void, or Streaks

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi