Xerox WorkCentre 6505 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 8-11
Service Parts Disassembly
Replacement Note
If a new Fuser is installed:
6. Reset the Fuser counter.
a. Power on the printer and allow it to reach Ready.
b. Press the Menu button (SFP) or System menu button (MFP).
c. Select Admin Menu > Maintenance (Mode) > Reset Fuser.
d. Click OK, then OK again at the Are you sure? prompt.
7. If the Fuser being replaced is at end of life, it is highly recommended
that the Feed Roller and Separator Holder also be replaced.
s6500-180

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi