Cisco Nexus 7000 Series - Clear Dot1 X

clear dot1x
To clear 802.1X authenticator instances, use the clear dot1x command.
cleardot1x{all| interface | slot/port}
Syntax Description
Specifies all 802.1X authenticator instances.all
Specifies the 802.1X authenticator instances for a
specified interface.
interface ethernet slot/port
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must use the feature dot1x command before you configure 802.1X.
This command does not require a license.
Examples
This example shows how to clear all 802.1X authenticator instances:
switch# clear dot1x all
This example shows how to clear the 802.1X authenticator instances for an interface:
switch# clear dot1x interface ethernet 1/1
Related Commands
DescriptionCommand
Enables the 802.1X feature.feature dot1x
Displays all 802.1X information.show dot1x all
Cisco Nexus 7000 Series Security Command Reference
78
C Commands
clear dot1x