Cisco Nexus 7000 Series - Show System Internal Access-List Feature Bank-Chain Map

show system internal access-list feature bank-chain map
To display the access control list (ACL) ternary content addressable memory (TCAM) bank mapping feature
group and combination tables, use the show system internal access-list feature bank-chain map command.
show system internal access-list feature bank-chain map vlan-vlan{egress| ingress}|port-vlan{egress|
{interface ingress| vlan egress}} [module module]
Syntax Description
Specifies the PORT-VLAN mode.port-vlan
Specifies the VLAN-VLAN mode.vlan-vlan
Displays feature class information for ingress
modules.
ingress
Displays feature class information for egress modules.egress
(Optional) Displays the module.
modulemodule
Displays the mapping output for PORT-VLAN
TCAM bank chaining mode for an interface.
interface
Displays the mapping output for PORT-VLAN
TCAM bank chaining mode for a VLAN.
vlan
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
The vlan and interface keywords were introduced.8.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the feature group and class combination tables for ingress module 2:
switch# show system internal access-list feature bank-chain map vlan-vlan ingress module 2
Cisco Nexus 7000 Series Security Command Reference
910
Show Commands
show system internal access-list feature bank-chain map