Cisco Nexus 7000 Series - Show Ip Arp Inspection Log

show ip arp inspection log
To display the Dynamic ARP Inspection (DAI) log configuration, use the show ip arp inspection log command.
show ip arp inspection log
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the DAI log configuration:
switch# show ip arp inspection log
Syslog Buffer Size : 32
Syslog Rate : 5 entries per 1 seconds
switch#
Related Commands
DescriptionCommand
Clears the DAI logging buffer.clear ip arp inspection log
Configures the DAI logging buffer size.ip arp inspection log-buffer
Displays the DAI configuration status.show ip arp inspection
Displays the trust state and the ARP packet rate for
a specified interface.
show ip arp inspection interface
Displays DHCP snooping configuration, including
DAI configuration.
show running-config dhcp
Cisco Nexus 7000 Series Security Command Reference
786
Show Commands
show ip arp inspection log