Cisco Nexus 7000 Series - Show Ip Arp Inspection Statistics

show ip arp inspection statistics
Use the show ip arp inspection statistics command to display the Dynamic ARP Inspection (DAI) statistics.
You can specify a VLAN or range of VLANs.
show ip arp inspection statistics [vlan vlan-list]
Syntax Description
(Optional) Specifies the list of VLANs for which to
display DAI statistics. Valid VLAN IDs are from 1
to 4096.
vlan vlan-list
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the DAI statistics for VLAN 1:
switch# show ip arp inspection statistics vlan 1
Vlan : 1
-----------
ARP Req Forwarded = 0
ARP Res Forwarded = 0
ARP Req Dropped = 0
ARP Res Dropped = 0
DHCP Drops = 0
DHCP Permits = 0
SMAC Fails-ARP Req = 0
SMAC Fails-ARP Res = 0
DMAC Fails-ARP Res = 0
IP Fails-ARP Req = 0
Cisco Nexus 7000 Series Security Command Reference
787
Show Commands
show ip arp inspection statistics