show cts role-based enable
To display the Cisco TrustSec security group access control list (SGACL) enable status for VLANs and Virtual
Routing and Forwarding instances (VRFs), use the show cts role-based enable command.
show cts role-based enable
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec SGACL enforcement status:
switch# show cts role-based enable
vlan:1
vrf:1
vrf:3
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
748
Show Commands
show cts role-based enable
To Next Page
Loading...
