Cisco Nexus 7000 Series - Enable

enable
To enable a user to move to a higher privilege level after being prompted for a secret password, use the enable
command.
enable level
Syntax Description
Privilege level to which the user must log in. The only
available level is 15.
level
Command Default
Privilege level 15
Command Modes
EXEC configuration
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
To use this command, you must enable the cumulative privilege of roles for command authorization on
TACACS+ servers using the feature privilege command.
This command does not require a license.
Examples
This example shows how to enable the user to move to a higher privilege level after being prompted for a
secret password:
switch# enable 15
Related Commands
DescriptionCommand
Enables a secret password for a specific privilege
level.
enable secret priv-lvl
Enables the cumulative privilege of roles for
command authorization on TACACS+ servers.
feature privilege
Displays the current privilege level, username, and
status of cumulative privilege support.
show privilege
Cisco Nexus 7000 Series Security Command Reference
284
E Commands
enable