Cisco Nexus 7000 Series - Show System Internal Access-List Globals

show system internal access-list globals
To display the access control list (ACL) ternary content addressable memory (TCAM) common information
along with the bank chaining mode, use the show system internal access-list globals command.
show system internal access-list globals
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the bank chaining mode:
switch# show system internal access-list globals
slot 2
=======
Atomic Update : ENABLED
Default ACL : DENY
Bank Chaining : VLAN-VLAN
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Bank Class Model : DISABLED
This pltfm supports bank class model
Fabric path DNL : DISABLED
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
L4 proto CAM extend : DISABLED
This pltfm supports L4 proto CAM extend
MPLS Topmost As Pipe Mode : DISABLED
This pltfm supports mpls topmost as pipe mode
LOU Threshold Value : 5
slot 3
=======
Atomic Update : ENABLED
Default ACL : DENY
Bank Chaining : PORT-VLAN
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Bank Class Model : DISABLED
This pltfm supports bank class model
Fabric path DNL : DISABLED
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Cisco Nexus 7000 Series Security Command Reference
914
Show Commands
show system internal access-list globals