Cisco Nexus 7000 Series - Show Cts Pacs

show cts pacs
To display the Cisco TrustSec protect access credentials (PACs) provisioned by EAP-FAST, use the show
cts pacs command.
show cts pacs
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec global configuration:
switch# show cts pacs
PAC Info :
==============================
PAC Type : unknown
AID : 74656d706f72617279
I-ID : india1
AID Info : ACS Info
Credential Lifetime : Thu Apr 3 00:36:04 2008
PAC Opaque : 0002008300020004000974656d706f7261727900060070000101001d
6321a2a55fa81e05cd705c714bea116907503aab89490b07fcbb2bd455b8d873f21b5b6b403eb1d8
125897d93b94669745cfe1abb0baf01a00b77aacf0bda9fbaf7dcd54528b782d8206a7751afdde42
1ff4a3db6a349c652fea81809fba4f30b1fffb7bfffaf9a6608
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
741
Show Commands
show cts pacs