Cisco Nexus 7000 Series - Show Startup-Config Port-Security

show startup-config port-security
To display port-security information in the startup configuration, use the show startup-config port-security
command.
show startup-config port-security [all]
Syntax Description
(Optional) Displays default port-security
configuration information.
all
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(3)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information for port-security in the startup configuration:
switch# show startup-port-security
version 4.0(3)
feature port-security
logging level port-security 5
interface Ethernet2/3
switchport port-security
Related Commands
DescriptionCommand
Displays port-security information in the running
configuration.
show running-config port-security
Cisco Nexus 7000 Series Security Command Reference
906
Show Commands
show startup-config port-security