Cisco Nexus 7000 Series - Cts Rekey

cts rekey
To rekey an interface for Cisco TrustSec policies, use the cts rekey command.
cts rekey ethernet slot/port
Syntax Description
Specifies an Ethernet interface.
ethernet slot/port
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to rekey an interface for Cisco TrustSec:
switch# cts rekey ethernet 2/3
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays Cisco TrustSec configuration information
for interfaces.
show cts interface
Cisco Nexus 7000 Series Security Command Reference
158
C Commands
cts rekey