show password secure-mode
To display the secure mode for changing password, use the show password secure-mode command.
show password secure-mode
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.6.1.4
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the secure mode for changing password:
switch# show password secure-mode
Password secure mode is enabled
Related Commands
DescriptionCommand
Enables password-strength checking.password strength-check
Cisco Nexus 7000 Series Security Command Reference
844
Show Commands
show password secure-mode
To Next Page
Loading...
