show fips status
To display the status of Federal Information Processing Standards (FIPS) mode, use the show fips status
command.
show fips status
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any
Command History
ModificationRelease
This command was introduced.5.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the status of FIPS mode:
switch# show fips status
FIPS mode is disabled
Related Commands
DescriptionCommand
Enables FIPS mode.fips mode enable
Cisco Nexus 7000 Series Security Command Reference
768
Show Commands
show fips status
To Next Page
Loading...
