Cisco Nexus 7000 Series - Clear Radius-Server Statistics

clear radius-server statistics
To clear the statistics for a RADIUS server host, use the clear radius-server statistics command.
clear radius-server statistics {ipv4-address| ipv6-address| server-name}
Syntax Description
IPv4 address of a RADIUS server host in A.B.C.D
format.
ipv4-address
IPv6 address of a RADIUS server host in A:B::C:D
format.
ipv6-address
Name of a RADIUS server host. The name is case
sensitive.
server-name
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear statistics for a RADIUS server:
switch# clear radius-server statistics 10.10.1.1
Related Commands
DescriptionCommand
Displays RADIUS server host statistics.show radius-server statistics
Cisco Nexus 7000 Series Security Command Reference
117
C Commands
clear radius-server statistics