password strength-check
To enable password-strength checking, use the password strength-check command. To disable
password-strength checking, use the no form of this command.
password strength-check
no password strength-check
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(3)
Usage Guidelines
When you enable password-strength checking, the Cisco NX-OS software only allows you to create strong
passwords. The characteristics for strong passwords include the following:
•
At least eight characters long
• Does not contain many consecutive characters (such as “abcd”)
• Does not contain many repeating characters (such as “aaabbb”)
•
Does not contain dictionary words
•
Does not contain proper names
•
Contains both uppercase and lowercase characters
•
Contains numbers
The following are examples of strong passwords:
•
If2CoM18
•
2004AsdfLkj30
•
Cb1955S21
When you enable password-strength checking, the Cisco NX-OS software does not check the strength of
existing passwords.
Note
Cisco Nexus 7000 Series Security Command Reference
529
P Commands
password strength-check
To Next Page
Loading...
