Cisco Nexus 7000 Series - Clear Hardware Rate-Limiter

clear hardware rate-limiter
To clear rate-limit statistics, use the clear hardware rate-limiter command.
clear hardware rate-limiter {access-list-log| all| copy| layer-2 {l2pt| mcast-snooping| port-security|
storm-control| vpc-low}| layer-3 {control| glean| glean-fast| mtu| multicast {directly-connected|
local-groups| rpf-leak}| ttl}| receive}
Syntax Description
Clears rate-limit statistics for access-list log packets.access-list-log
Clears all rate-limit statistics.all
Clears rate-limit statistics for copy packets.copy
Specifies Layer 2 packet rate limits.layer-2
Clears rate-limit statistics for Layer 2 Tunnel Protocol
(L2TP) packets.
l2pt
Clears rate-limit statistics for Layer 2
multicast-snooping packets.
mcast-snooping
Clears rate-limit statistics for Layer 2 port-security
packets.
port-security
Clears rate-limit statistics for Layer 2 storm-control
packets.
storm-control
Clears rate-limit statistics for Layer 2 control packets
over the VPC low queue.
vpc-low
Specifies Layer 3 packet rate limits.layer-3
Clears rate-limit statistics for Layer 3 control packets.control
Clears rate-limit statistics for Layer 3 glean packets.glean
Clears rate-limit statistics for Layer 3 glean fast-path
packets.
glean-fast
Clears rate-limit statistics for Layer 3 maximum
transmission unit (MTU) packets.
mtu
Specifies Layer 3 multicast rate limits.multicast
Clears rate-limit statistics for Layer 3 directly
connected multicast packets.
directly-connected
Cisco Nexus 7000 Series Security Command Reference
81
C Commands
clear hardware rate-limiter