Cisco Nexus 7000 Series - Page 108

Clears rate-limit statistics for Layer 3 local group
multicast packets.
local-groups
Clears rate-limit statistics for Layer 3 reverse path
forwarding (RPF) leak multicast packets.
rpf-leak
Clears rate-limit statistics for Layer 3 time-to-live
(TTL) packets.
ttl
Clears rate-limit statistics for receive packets.receive
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
Added the glean-fast keyword.6.2(2)
Added the l2pt keyword.5.0(2)
Added the port-security keyword.4.0(3)
This command was introduced.4.0(1)
Usage Guidelines
You can use the command only in the default virtual device context (VDC).
This command does not require a license.
Examples
This example shows how to clear all the rate-limit statistics:
switch# clear hardware rate-limiter all
This example shows how to clear the rate-limit statistics for access-list log packets:
switch# clear hardware rate-limiter access-list-log
This example shows how to clear the rate-limit statistics for Layer 2 storm-control packets:
switch# clear hardware rate-limiter layer-2 storm-control
This example shows how to clear the rate-limit statistics for Layer 3 glean packets:
switch# clear hardware rate-limiter layer-3 glean
This example shows how to clear the rate-limit statistics for Layer 3 directly connected multicast packets:
switch# clear hardware rate-limiter layer-3 multicast directly-connected
Cisco Nexus 7000 Series Security Command Reference
82
C Commands
clear hardware rate-limiter