Cisco Nexus 7000 Series - Role Feature-Group Name

role feature-group name
To create or specify a user role feature group and enter user role feature group configuration mode, use the
role feature-group name command. To delete a user role feature group, use the no form of this command.
role feature-group name group-name
no role feature-group name group-name
Syntax Description
User role feature group name. The group-name has
a maximum length of 32 characters and is a
case-sensitive, alphanumeric character string.
group-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
The Cisco NX-OS software provides the default user role feature group L3 for Layer 3 features. You cannot
modify or delete the L3 user role feature group.
This command does not require a license.
Examples
This example shows how to create a user role feature group and enter user role feature group configuration
mode:
switch# configure terminal
switch(config)# role feature-group name MyGroup
switch(config-role-featuregrp)#
This example shows how to remove a user role feature group:
switch# configure terminal
switch(config)# no role feature-group name MyGroup
Related Commands
DescriptionCommand
Specifies or creates a user role feature group and
enters user role feature group configuration mode.
feature-group name
Cisco Nexus 7000 Series Security Command Reference
628
R Commands
role feature-group name