Cisco Nexus 7000 Series - Eou Revalidate (EXEC)

eou revalidate (EXEC)
To revalidate Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) sessions, use the
eou revalidate command.
eou revalidate {all| authentication {clientless| eap| static}| interface ethernet slot / port| ip-address
ipv4-address| mac-address mac-address| posturetoken name}
Syntax Description
Revalidates all EAPoUDP sessions.all
Revalidates EAPoUDP sessions for specific
authentication types.
authentication
Specifies sessions authenticated using clientless
posture validation.
clientless
Specifies sessions authenticated using EAPoUDP.eap
Specifies sessions authenticated using statically
configured exception lists.
static
Revalidates the EAPoUDP sessions for a specific
interface.
interface ethernet slot/port
Revalidates the EAPoUDP sessions for a specific
IPv4 address.
ip-address ipv4-address
Revalidates the EAPoUDP sessions for a specific
MAC address.
mac-address mac-address
Revalidates the EAPoUDP sessions for a specific
posture token.
posturetoken name
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Cisco Nexus 7000 Series Security Command Reference
305
E Commands
eou revalidate (EXEC)