Cisco Nexus 7000 Series Command Reference

eou revalidate (global configuration and interface configuration)
To enable automatic periodic revalidation of Extensible Authentication Protocol over User Datagram Protocol
(EAPoUDP) sessions globally or for a specific interface, use the eou revalidate command. To revert to the
default, use the no form of this command.
eou revalidate
no eou revalidate
Syntax Description
This command has no arguments or keywords.
Command Default
Global configuration: Enabled
Interface configuration: Global configuration value
Command Modes
Global configuration Interface configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
The automatic revalidation setting for an interface overrides the global setting for automatic revalidation.
The Cisco NX-OS software supports an eou revalidate command in EXEC configuration mode. To use
an EXEC-level eou revalidate command in global configuration mode, include the required keywords.
Note
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples
This example shows how to disable global automatic revalidation of EAPoUDP sessions:
switch# config t
switch(config)# no eou revalidate
This example shows how to enable global automatic revalidation of EAPoUDP sessions:
switch# config t
switch(config)# eou revalidate
This example shows how to disable automatic revalidation of EAPoUDP sessions for an interface:
switch# config t
switch(config)# no eou revalidate
Cisco Nexus 7000 Series Security Command Reference
307
E Commands
eou revalidate (global configuration and interface configuration)

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)