EasyManua.ls Logo

Cisco Nexus 7000 Series - Ldap-Server Host

Cisco Nexus 7000 Series
1018 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ldap-server host
To configure Lightweight Directory Access Protocol (LDAP) server host parameters, use the ldap-server
host command. To revert to the defaults, use the no form of this command.
ldap-server host {ipv4-address| ipv6-address| host-name} [enable-ssl] [port tcp-port [timeout seconds]]
[rootDN root-name [password password] [port tcp-port [timeout seconds]| [timeout seconds]]] [test rootDN
root-name [idle-time minutes| password password [idle-time minutes]| username name [password password
[idle-time minutes]]]] [timeout seconds]
noldap-server host {ipv4-address| ipv6-address| host-name} [enable-ssl] [port tcp-port [timeout seconds]]
[rootDN root-name [password password] [port tcp-port [timeout seconds]| [timeout seconds]]] [test rootDN
root-name [idle-time minutes| password password [idle-time minutes]| username name [password password
[idle-time minutes]]]] [timeout seconds]
Syntax Description
Server IPv4 address in the A.B.C.D format.ipv4-address
Server IPv6 address in the X:X:X:X format.ipv6-address
Server name. The name is alphanumeric, case
sensitive, and has a maximum of 256 characters.
host-name
(Optional) Ensures the integrity and confidentiality
of the transferred data by causing the LDAP client to
establish a Secure Sockets Layer (SSL) session before
sending the bind or search request.
enable-ssl
(Optional) Specifies the TCP port to use for LDAP
messages to the server. The range is from 1 to 65535.
port tcp-port
(Optional) Specifies the timeout interval for the
server. The range is from 1 to 60 seconds.
timeout seconds
(Optional) Specifies the root designated name (DN)
for the LDAP server database. You can enter up to
128 alphanumeric characters for the root name.
rootDN root-name
(Optional) Specifies the bind password for the root.
password password
(Optional) Configures parameters to send test packets
to the LDAP server.
test
Specifies the time interval (in minutes) for monitoring
the server. The range is from 1 to 1440 minutes.
idle-time minutes
Cisco Nexus 7000 Series Security Command Reference
481
L Commands
ldap-server host

Table of Contents

Other manuals for Cisco Nexus 7000 Series

Related product manuals