Cisco Nexus 7000 Series Command Reference

clear cts policy
To clear the Cisco TrustSec security group access control list (SGACL) policies, use the clear cts policy
command.
clear cts policy {all| peer device-id| sgt sgt-value}
Syntax Description
Clears all the Cisco TrustSec SGACL policies on the
local device.
all
Clears the Cisco TrustSec SGACL policies for a peer
device on the local device.
peer device-id
Clears the Cisco TrustSec SGACL policies for a
security group tag (SGT) on the local device.
sgt sgt-value
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to clear all the Cisco TrustSec SGACL policies on the device:
switch# clear cts policy all
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays Cisco TrustSec SGACL policy information.show cts role-based policy
Cisco Nexus 7000 Series Security Command Reference
63
C Commands
clear cts policy

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)