Cisco Nexus 7000 Series - Show Dot1 X All

show dot1x all
To display all 802.1X feature status and configuration information, use the show dot1x all command.
show dot1x all [details| statistics| summary]
Syntax Description
(Optional) Displays detailed information about the
802.1X configuration.
details
(Optional) Displays 802.1X statistics.statistics
(Optional) Displays a summary of 802.1X
information.
summary
Command Default
Displays global and interface 802.1X configuration
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must enable the 802.1X feature by using the feature dot1x command before using this command.
This command does not require a license.
Examples
This example shows how to display all 802.1X feature status and configuration information:
switch# show dot1x all
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Dot1x Info for Ethernet2/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = FORCE_AUTH
HostMode = SINGLE HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0
Cisco Nexus 7000 Series Security Command Reference
761
Show Commands
show dot1x all