crypto certificatemap mapname
To create a filter map, use the crypto certificatemap mapname command.
crypto certificatemap mapname map-name
Syntax Description
Name of the filter map. You can enter up to 64
alphanumeric characters.
map-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
To use this command, you must configure a cert-store for certificate authentication.
This command does not require a license.
Examples
This example shows how to create a new filter map:
switch(config)# crypto certificatemap mapname
filtermap1
Related Commands
DescriptionCommand
Configures one or more certificate mapping filters
within the filter map.
filter
Displays the certificate mapping filters.show crypto certificatemap
Cisco Nexus 7000 Series Security Command Reference
141
C Commands
crypto certificatemap mapname
To Next Page
Loading...
