show running-config tacacs+
To display TACACS+ server information in the running configuration, use the show running-config tacacs+
command.
show running-config tacacs+ [all]
Syntax Description
(Optional) Displays default TACACS+ configuration
information.
all
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must use the feature tacacs+ command before you can display TACACS+ information.
This command does not require a license.
Examples
This example shows how to display TACACS+ information in the running configuration:
switch# show running-config tacacs+
Related Commands
DescriptionCommand
Displays TACACS+ information.show tacacs-server
Cisco Nexus 7000 Series Security Command Reference
891
Show Commands
show running-config tacacs+
To Next Page
Loading...
