show startup-config radius
To display RADIUS configuration information in the startup configuration, use the show startup-config
radius command.
show startup-config radius
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the RADIUS information in the startup configuration:
switch# show startup-config radius
version 4.0(1)
Cisco Nexus 7000 Series Security Command Reference
907
Show Commands
show startup-config radius
To Next Page
Loading...
