cts cache enable
To enable Cisco TrustSec authentication and authorization information caching, use the cts cache enable
command. To revert to the default, use the no form of this command.
cts cache enable
no cts cache enable
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to enable Cisco TrustSec authentication and authorization caching:
switch# config t
switch(config)# cts cache enable
This example shows how to disable Cisco TrustSec authentication and authorization caching:
switch# config t
switch(config)# no cts cache enable
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays Cisco TrustSec configuration information.show cts
Cisco Nexus 7000 Series Security Command Reference
142
C Commands
cts cache enable
To Next Page
Loading...
