Cisco Nexus 7000 Series - Show Eou

show eou
To display Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) status and
configuration information, use the show eou command.
show eou [all| authentication {clientless| eap| static}| interface ethernetslot/port| ip-address ipv4-address|
mac-address mac-address| posturetoken [name]]
Syntax Description
(Optional) Displays all EAPoUDP sessions.all
(Optional) Displays EAPoUDP sessions for specific
authentication types.
authentication
Specifies sessions authenticated using clientless
posture validation.
clientless
Specifies sessions authenticated using EAPoUDP.eap
Specifies sessions statically authenticated using
statically configured exception lists.
static
(Optional) Displays the EAPoUDP sessions for a
specific interface.
interface ethernet slot/port
(Optional) Displays the EAPoUDP sessions for a
specific IPv4 address.
ip-addressipv4-address
(Optional) Displays the EAPoUDP sessions for a
specific MAC address.
mac-addressmac-address
(Optional) Displays the EAPoUDP sessions for
posture tokens.
posturetoken [name]
(Optional) Token name.
name
Command Default
Displays the global EAPoUDP configuration
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Cisco Nexus 7000 Series Security Command Reference
766
Show Commands
show eou