Cisco Nexus 7000 Series - Ip Radius Source-Interface

ip radius source-interface
To assign a global source interface for the RADIUS server groups, use the ip radius source-interface
command. To revert to the default, use the no form of this command.
ip radius source-interface interface
no ip radius source-interface
Syntax Description
Source interface. The supported interface types are
ethernet, loopback, and mgmt 0.
interface
Command Default
Any available interface
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the global source interface for RADIUS server groups:
switch# configure terminal
switch(config)# ip radius source-interface mgmt 0
This example shows how to remove the global source interface for RADIUS server groups:
switch# configure terminal
switch(config)# no ip radius source-interface
Related Commands
DescriptionCommand
Displays the RADIUS server group configuration.show radius-server groups
Cisco Nexus 7000 Series Security Command Reference
422
I Commands
ip radius source-interface